Speaking of Cable, it is the same for those messy wires, network cables, and data cables to sort out the messy things, many friends – including myself before! ——I will feel a headache, the wires on the table and under the table are entangled and intertwined, like a mess that is unclear! Not only does it seem messy and affect your mood, sometimes it takes a long time to find a wire, and you may even accidentally kick it and knock it off, or break the wire, which will be a big trouble.
first. We have to understand first. To put it bluntly, Cable is actually a reasonable operation and work on various messy cables. Provide global procurement services for weak current intelligent products! The purpose is to make those rope-like threads neat and clean, easy to use, make the environment look more comfortable, and protect the threads from breaking easily and extend their service life.
So how do you do it to get these annoying cables done? Come on, I'll give you some practical and useful tips and steps. I've tried it myself or heard from friends around me that I thought it useful:
1. First of all, you have to get out all the wires, that is, unplug all the wires inserted into various devices, and then make it clear one by one to see which wires are there, how long they are, and what they are used on which device. Here you can take a small notebook and take a photo with your mobile phone, so as to avoid the trouble of getting confused after being confused.
2. Then, throw away the broken, useless, and unnecessary threads and remove them! This step is very important! Otherwise, keeping useless threads will still be messy, taking up space and causing trouble.
3. Next, for those lines that are indeed useful, but some are too long, you can consider using special lines such as cable ties, or reusable Velcro Cable straps, tie them up, and make the lines become small bunches, and don't spread out in a mess. Be careful, don't tie it too tightly when binding. If it is too tight, it may break the thread and tie it gently to fix it.
4. If there are a lot of wires on the desktop, you can consider using a desktop Cable storage cable trough, which is a long, striped groove that can be glued to the desktop or the side of the table, and then stuff the wires into the grooves, so that there will be no more lines on the desktop, which is much cleaner.
5. Connect the lines below the table from the top of the table. You can forcefully and try to lean them against the back of the table or the legs of the table, and then use the sticky Cable clip or a small sticky hook to the legs of the table or the back of the table. Fix the lines on it, so as not to let them hang in the air and sway around, and you will feel upset when you look at it.
In addition to these tips and methods, there are also some useful gadgets that can also help you. Let me briefly introduce you to a few to choose:
・Velcro Cable tie
This thing is very useful! ——The advantage is that it can be repeatedly stuck, tear open and sticky. Unlike some disposable cable ties, if you want to remove them, you have to cut them off. That is more wasteful and not environmentally friendly. And you can tick as you want, it is very convenient and flexible to adjust.
・Cable
It is something like a tube. It can be soft and can be used to put several wires inside and turn into a thicker tube, but there are actually several different wires inside. This will turn a bunch of lines into a whole, making them look much more neat and can also protect the lines from being worn and broken – but if there are more lines, it may be a bit troublesome and difficult to put in.
・Desk Cable
This is usually easy to use by punching holes on the table. The thread can be penetrated from the hole to the bottom of the table. There is only a small piece of thread left on the table, which can hide a lot of threads. It’s very good to install on that particularly important office desk!
Maybe now, you still have some questions in your mind to ask me? It doesn't matter. I'll find a few common questions to answer:
Q: What if there are many lines and the colors are the same, and it is impossible to tell which one is the source of which one?
A: Well… this problem is indeed encountered by many people. You can… you can put a small, very thin Cable label paper on each cable, and write on the label which device is connected to the cable, such as "monitor power cord", "computer keyboard USB cable", etc. Or you can also buy Velcro patches of different colors to bring different equipment to the wires, such as the red wire tied in front of the monitor, and the blue wire tied in the keyboard data device. This way, you can know which bump wire is about when you look at the color, which is very convenient and easy to find!
Q: What should I do if I don’t have so many specialized sorting tools at home? Can it be used? Is there anything you don't usually use to replace it? Didn't use anything to sort out?
A: Everyone has come up with the solution! For example, if the scrap newspaper is rolled into a hollow barrel shape of a pen holder, inserting the thread that will not be scalded into the center of the paper; there is also the kind of transparent beverage bottle that has been washed and cut off and left a piece between the upper and lower ends. You can also use a wire frame to install it; a rubber band that is a little wider can be used as a strap to tie the thread to save the emergency. If it really doesn't work, you can just use a rope to just use a few strokes – as long as you don't tie the thread hard and tie it up.
Personally, I think that if I take some time and effort to do Cable, it is still a very cost-effective and worthwhile task! Although it may feel a little troublesome at the beginning, after it is done, the whole space feels different, and it is refreshing – it feels smooth when you start to use your hands! It is not lying to say that finding the online device is very fast and convenient. If you want to move any device, you don’t have to be careful to drag it to other devices to connect. So try it and act quickly! Provide global procurement services for weak current intelligent products! Stop letting those annoying cables continue to "bully" us!
Leave a Reply