




Metal Cable Management Panel
Cabinet System
Products
Metal Cable Management PanelCabinet SystemCtrlWorks Cabinet System
- Used for vertical cable routing on both sides of cabinets for cable inlet and outlet management.
Ordering Information
Model No. | Width(mm) | Length(mm) |
701737102 | 150 | 37U |
701742102 | 150 | 42U |
701747102 | 150 | 47U |
701737103 | 300 | 37U |
701742103 | 300 | 42U |
701747103 | 300 | 47U |
Related Recommendations
Cabinet System

SA Series Wall-mounted Cabinet
Cabinet System
- Two cable routing channels at the top and bottom The opening direction of the front door can be freely adjusted as required; quick-opening side doors support two installation methods Pre-installed wall mounting plates for easy cabinet installation.
- It can be locked with screws from the inside to prevent theft or accidental falling The mounting depth of the rack rails can be adjusted back and forth as required

Fan
Cabinet System
- Optional accessory for ventilation and heat dissipation of wall-mounted cabinets.
- Performance Parameters: Overall dimension: 12012038
- Air flow rate: 50CFM, single fan noise: 24.9dBA
- Operating temperature: -10℃ ~ +50℃, continuous service life up to 30,000 hours
- Ball bearing fans need to be ordered separately when required.
- Nickel-plated fan guard and connecting cable are available for separate ordering

Rotary Wire Stripper
Cabinet System
- Can be used as a 110-type punch-down tool.
- Rotate three turns to strip off the plastic outer jacket of twisted pair cable.
- Stripping without damaging inner conductors.

Visual Fault Locator (Fiber Optic Tester)
Cabinet System
- This pocket-sized optical fiber visual fault locator adopts a 650nm laser emitter with output power above 1mW, suitable for detecting single-mode and multi-mode optical fibers. It is powered by common AAA batteries, equipped with efficient DC-DC power management for long continuous working hours and low power consumption. Compact in design and fitted with an impact-resistant protective sleeve.
- Equipped with universal output port, compatible with standard 2.5mm fiber connectors such as SC/FC/ST. It can test various types of fiber jumpers, ribbon fibers and pigtails, serving as an ideal tool for fiber network construction and maintenance.
- Adopts high-performance quantum well LD light source.
- Intelligent switch design for better energy efficiency.
- Freely switchable between CW / MOD operating modes.
- Strong laser beam enables long-distance detection.
- Small and lightweight, easy to carry.











