security solutions

recent posts

about

ctrlworks.net is a world-leading manufacturer and procurement service provider of low-voltage intelligent products.

  • Solar Powered Closed-circuit TV System Has Attracted Attention, And Key Components And Energy Storage Selection Need To Be Paid Attention To

    In today's security field, Solar-CCTV, which is the solar-powered closed-circuit TV system, is attracting more and more attention. It relies on solar energy to convert electricity to maintain CCTV operation. It can effectively reduce the dependence on traditional power supply. You can show off your skills in some places where power is inconvenient to lay, such as remote mountainous areas and outdoor monitoring points.

    Let's break down its key points carefully

    1. Solar panels: The key component is solar panels. You have to carefully choose according to the actual environment and electricity consumption. The lighting duration should be calculated accurately. If there is insufficient lighting, you must choose a board with high conversion efficiency and larger area to accumulate sufficient power in the subsequent storage and accumulation. Moreover, the quality of the board must be good to resist wind, sun and rain, and the performance is definitely not good.

    2. In terms of battery energy storage: You need to choose an adapted battery to store solar energy, this guy! There are many options for lead-acid batteries, lithium batteries, etc. There are many different models. For example, the energy density of lead-acid batteries is average, but their price is affordable. The energy density of lithium batteries is higher, and the cost is more expensive. For battery capacity, we have to consider the local average sunshine situation and the power consumption of the equipment at night. The planning must be meticulous to ensure that the equipment is constantly powered by energy sources. In case of power outage, the impact monitoring will be stopped.

    3. Controller link: This control component is extremely useful. The main purpose is to prevent the battery from overcharging. If it is fully charged, it must be overcharged, and it must be avoided in such a bad state. If it is used until it is not powered, it will continue to use it. And so on, the functions must be comprehensive. Accurately adjust the charging process between the solar panel and the battery. You can't mess around. Otherwise, the problem of battery loss will be too fast, which will reduce the overall application cycle of the entire system and will be much shorter. This requires a controller that meets the standards in various aspects such as reliability and stability. The quality cannot be dealt with incorrectly, and this has a great impact. To be honest, it is very important.

    Let's talk about questions and answers

    Q: Some people say that this thing is more expensive than traditional ones? Comparative answers: The initial equipment procurement, installation and debugging process is calculated, which is more expensive than using traditional powered CCTV. You have to spend some money to buy equipment components and have special plans to install them. You have to carefully consider the arrangements for solar energy. This fee is not to be missed and you have to pay attention to it. From the perspective of long-term battery life, energy costs basically no longer exist, and there is basically no solar energy, but it is free. After using it for a long time, the total cost can be greatly reduced. It's a good idea to see

    Q: This system is not good at Continuous Yin Tianxia, ​​right? Answer: In general system design, battery storage capacity planning is done. I will consider counting several rainy days in a row, how to use it in such a situation? Hehe, if there is insufficient planning, you can choose to increase the battery capacity or add other power supply facilities to assist in backup equipment such as adding micro generators, etc., in various ways to ensure stable operation to the greatest extent possible. It is not necessarily impossible to deal with it in Yintian.

    Some people wonder whether it is not authentic and stable to rely on solar energy alone? In fact, with the update of technology, as mentioned above, many difficulties such as energy storage, how to ensure the stability of the controller's ability is enhanced, these are not problems. I personally think Solar-CCTV is a very friendly tool for flexible and adaptable power supply, especially for many scenarios where power is inconvenient to be arranged. It is worth promoting and using it. Many places should be tried. And provide global procurement services for weak current intelligent products! In the future, if you want to do this, you will have a good channel for global materials and other materials, which is an advantage.

  • Solar Powered Surveillance Cameras Are Attracting Attention, And Are Flexible And Energy-saving! What's The Principle?

    In today's security field, Solar, a solar-powered surveillance camera, is attracting more and more attention from everyone! This is not something you can say casually. Let’s first find out what this is. Simply put, it is a type of security camera that uses solar panels to absorb sunlight, convert it into electricity, and provide long-lasting power to monitoring equipment.

    There are so many advantages

    The first one is the installation location is super flexible. Don't need to find a wiring and connect power like a traditional camera. As long as there is sunlight, you can install it even in remote wilderness, mountains, wastelands, and places without power! Let's just put the solar panels towards the sun, and it can supply power, which is easier to save trouble

    The second advantage is energy-saving and environmentally friendly! With the help of solar power generation, it means relying less on traditional power supply and can contribute to our environmental protection. And if we calculate it over a long time, we can save a lot of electricity bills, so why not do it?

    Then three, the stability and durability are so outstanding!

    Generally, cameras may have power outages or something, but solar power supply is usually much more reliable. Moreover, the equipment is simple and there are no easy-to-damage power components. Not only can the equipment maintenance cost be reduced, it can also work for a long time.

    Let’s talk about the important key points of choosing this type of product:

    Buy Solar – Key Elements

    First of all, the picture quality. Buy the one with high resolution! At least 2K or 4K clearness is required. Only by looking at this way can you capture clear image details during the monitoring process. Don’t delay the situation due to blurred images at critical moments. This can effectively ensure that any hidden dangers cannot escape our eyes when replaying and viewing.

    The next is night vision ability. The camera is only responsible for the day and not at night. So you must have night vision. This requires attention to how far apart the lens can see at night, how quickly it can automatically dim and set up when the brightness changes, etc. These directly determine whether the performance of the duties will be performed as usual in scenes without light or even light.

    The third one is storage devices. How do you consider storage? You see, if you choose local storage, you must consider the hard disk capacity clearly, and the disk size determines the duration of the video being saved. On the other hand, cloud storage is optional, that is, camera data is transferred to the cloud and saved there to facilitate remote viewing and calling, but you have to pay attention to whether the data is secure, and there are pros and cons.

    Let's talk about the installation part

    About Solar- Installation

    The installation is not difficult, so you must choose a sufficient area for sunshine time. The degree of sunlight exposure to solar panels is closely related to power supply efficiency.

    How much energy is used? The more sunlight is and the unobstructed, the power supply is constantly the camera can work 24/7

    Secondly, try to be taller. The purpose is more important to avoid touching and destroying others. It is more important to facilitate the acquisition of a large-scale vision.

    Generally speaking, the installation is two meters above the ground to ensure the completeness and consistency of the monitoring screen.

    After setting up the data connection, installing the software to watch the recorded videos managed to playback. Now most of them support smartphone viewing.

    Let's answer some common questions below

    About Solar – FAQ

    A friend asked, "Can this camera still be used on cloudy days?" The answer was yes. Even if the solar panels scatter solar light on cloudy days, they can still absorb some electricity. However, the power accumulation speed is greatly slowed down and installed as high as possible. Occasionally, there is no big impact on cloudy days, but the weather is often too poor, it will still hinder the battery life.

    Then someone asked, "It will take a long time for such a device" and there is no problem with this for five or six years of normal use. As long as the solar energy components are installed correctly, it is cleaned regularly and maintained well. Many people have reported that the equipment failure has not been used for ten years. Although the technology is constantly updated, the old model is updated quickly. In fact, it can be used for a long time, but the cost will be reduced.

    In case of sudden battery equipment damage problems, the cost of updating and replacing parts is not high, and it is easier to find the same adapter. Don't worry about not being able to deal with it in the future.

    For example, if you have questions about the connection method, you can consider direct connection of the network cable and flexible Wi-Fi connection. According to the use environment, if you are close to the router, it is very worry-free. If you connect it with a longer network cable, you can do it easily. How to arrange it easily.

    I personally think that Solar- is really convenient, and it is not troublesome to install and use. It can reduce costs and ensure property safety. Especially the living environment is large and remote offices in mountain farms and factories are very practical. It is recommended that you consider giving priority. If you can't guarantee that one day you will have to use it to provide global procurement services for weak current intelligent products!

  • Green Building Solutions: Building Environmentally Friendly And Energy-saving Buildings Requires Attention In Many Aspects

    Green These things are actually a very important aspect of the architectural field today. To put it bluntly, this Green is committed to building a more environmentally friendly and energy-saving building through various specific measures. To put it in detail, it is a concept that is very comprehensive, but sometimes it is a very confusing concept.

    Let’s briefly talk about this overall scope first. First of all, you can see that the application of energy is mainly focused on efficient. Then, the overall use of water control is more reasonable!

    When it comes to building materials selection, it’s not OK to use them anyway! Choose these here without any negative effects on the environment. You can use them with confidence and will not pollute those materials. This design emphasizes cleverly connecting our surrounding natural environment with this architectural design. Many aspects make up the Green

    Let’s talk about some key points on the module separately. Just focus on energy saving on the building body! This matter – first of all, we need to calculate what is the overall lighting and heat insulation needs. For example, this calculation is very important based on the environment characteristics of the place where it is located! Let’s talk about this design. You can't do it casually, if it's not done well, or if someone doesn't know how to do it, it will cause trouble! After the lighting calculation is done, the lighting time will be required to be less, and electricity will be saved a lot. If the design is done, this is the first priority!

    Another thing is that the roof wall is made of a certain insulation layer. Think about it, this is very clear. It’s like wrapping a cloth into a cup in winter so that the warm water will not get cold. Then the same principle is added to the temperature difference protection is the same as the effect of wrapping a cup into a cloth. Isn’t this a good reflection of the energy saving concept?

    Then this thing is that solar energy is so common nowadays. There are many ways to use this. Moreover, the methods and settings are all kinds of different methods, just like the calculation of the inclination of the installation board, which is different from our ordinary installation. Here, some related technical parameters must be remembered. Also, why does the different materials affect the different energy conversion rates? Because there are different energy conversion rates, so here is also a big idea!

    Provide global procurement services for weak current intelligent products!

    Let’s take a look at the water conservation process, which is also a major area for Green. One is how we arrange the rainwater collection. First of all, let’s talk about the equipment that collects, such as connecting a pipeline channel or simply combining rain collection and water treatment equipment, and then use it. You can use these places such as toilet flushing and other purposes. Let’s talk about the recycled water system. Let me briefly talk about the key points of how to reuse water. The water we collect and filter can do other things! This is different just now, the rainwater is obtained from the sewage. Of course, the process is more complicated and there are many steps! And it’s not a wastewater that can be used. This is a key point that needs to be paid attention to! Now let’s talk about the choice of various materials separately. There is a major basis for choosing these materials, which are based on their own components. They cannot be very polluted materials. There is also the problem of life span. If you change it frequently, it is not a very good material. Let’s talk about things that are highly ecological and durable.

    There is also the type of sustainable growth that not only meets the current housing construction but also helps protect resources for the long term. Is this clear that there are many things in this regard! But remember that you must not have any harm. You must not make harmful substances large, and if you abandon them, you can occupy a large area and cannot be recycled. This will not cause any harm to the environment and have no idea about materials like this!

    Let’s talk about some FAQs below. First of all, many people want to ask if it is particularly expensive to choose this type of construction solution? We objectively say that the initial cost is indeed slightly larger than the traditional one, but in the long run, it saves water and electricity costs, which are far more expensive than the previous one, so it is still a very worthwhile investment type. Then many people below say whether the design requirements are too large and it is not easy to implement? The answer is that modern design software assists, including people's aesthetic concepts that support this kind of people. As long as the early problems are overcome and gradually become popularized, it will still become a climate. Then, let's ask whether the specific level of workers in construction will not meet the requirements. To be honest, these people can gradually improve through training, and the level will naturally reach the requirements later. Many places are gradually improving their standards, and learning from experience and advanced learning is also of great help to the quality of workers.

    Some people also think that green buildings must be new large houses to achieve this completely. In fact, you must know that renovations can also be implemented as much as possible and achieve the same effect. In some key points, use appropriate instructions to design energy-saving on old houses to rebuild some roofs, such as adding better isolation and warmth. Next, there is also the re-wiring planning of the water, electricity and drainage, or the layout of rainwater just mentioned can be completely solved. In this kind of reconstruction, we are not inferior to the distinction between the one-time construction of new buildings. Let me talk about another key point. Regarding which architectural solution to choose, some people think that they must follow the trend of some countries to be better. In fact, the difference is that geology and geography also involves living habits and other differences, such as many of our own experiences are sometimes good to solve our own problems!

    So for Green, I really feel that this will inevitably become more and more common in the future, covering more buildings! In the future, people will pay more and more attention to environmental protection. We will do more green actions in terms of building energy, which will save a lot of money and provide our environment with a long-term comfortable space. But if you have this part, it would be great if you can use it slowly and try it more. The future prospects will be beautiful and bright! In our lives, our earth's state can be changed a lot because of this big measure.

  • What Is Wi-Fi 6 Deployment? How To Consider Deploying Environment Elements?

    Wi-Fi 6

    (The style of embedding high-frequency search terms in the opening remark is a key point) Well… Let's talk about what Wi-Fi 6 is deployed first. Wi-Fi 6 Simply put, it is a process of performing a series of installations, configurations, and making it work normally…uh…

    For Wi-Fi 6, there are many factors to consider. Like the deployment environment, the first module is the first;

    1. Deployment environment: From the perspective of space scale, from a small area like a family room, to a large area like a large office building… There are big differences in the complex environment structure and different functions of different areas. For spaces like home, the main consideration is whether the coverage can meet the needs of various equipment for family members at any time; in contrast, office buildings should not only consider the use of multiple people and multiple equipment, but also different office areas… the department should use a bad use rate to compare it with fish ponds with different water flow requirements, and ensure that the appropriate network speed flows into the "fish ponds".

    2. This is the second important module for the device: on the one hand, do existing Internet access devices such as computers and mobile phones support Wi-Fi? . Old devices are likely to not be able to "get along well with the newly adopted Wi-Fi. If Wi-Fi 6 is used but many old devices are not on the upgrade list, even if they are deployed in a very good manner… it may be worse… On the other hand, there are network devices such as routers and… other wireless access points. The new router must meet the requirements when ensuring that it can support Wi-Fi 6 functions. Moreover, the specifications and other products of different brands are different.

    Next, let’s add some useful details in the form of a question and answer…

    Q: How should new and old devices be effectively compatible during deployment? Oh, that's it!

    Answer: Check these Internet access devices on your network. If it is a bit old… You need to determine whether you can upgrade to the state that can be connected to Wi-Fi 6 based on the official dynamics given by the manufacturer. If you can't, then consider whether you have to keep using it. Anyway, the network bandwidth of Wi-Fi 6 is definitely much longer. Even if you add several updated devices with similar configurations, please go in… See if those old antiques should continue to drag the overall improvement space!

    Q: Compared with traditional Wi-Fi, what are the advantages of Wi-Fi 6?

    Answer: Compared with traditional…well, Wi-Fi technology, Wi-Fi 6 adopts the new multi-mode parallel access mode. To put it simply, in the past, like a group of people queuing up to cross the river and bridge in sequence, Wi-Fi 6 is a kind of crossing the river with many people… In this way, the number of devices is increased; so at the same time, some of them have a larger coverage and more transmission capacity… Of course, it has more advantages in the effective range for signals such as penetration, weakening of signals in the air, etc.

    Let’s talk about the deployment environment… from a realistic perspective, different frequencies have different impacts on the coverage environment. For example, generally speaking, low frequencies… like 2.4GHz, which can run farther and farther… cover many areas with larger and farther areas; while 5GHz high frequencies are responsible for carrying large data flow and exchange! Provide global procurement services for weak current intelligent products!

    There is another thing to pay attention to when it comes to interference factors; for example, the impact of electromagnetic radiation emitted by the equipment must be clearly checked and avoided.

    Finally, I think Wi-Fi 6 technology is very mature and deployment can greatly optimize many people's wireless network usage; it is a situation where actively and scientifically deploying and using it under the appropriate conditions is definitely not a loss! It will definitely provide support elements for us to become more and more convenient wireless Internet life.

  • OpenBMS Implementation Guide: How Much Do You Know About Its Role And Key Points Of Implementation?

    Implementation Guide, let’s talk about what this is. , is an open battery management system. This concept has played a significant role in many fields. If this is implemented well, it will be stable and beneficial to the entire system. Even if we can imagine that the picture will be able to run smoother.

    In terms of implementation, there are some key points that cannot be underestimated. For example, we have to understand the requirements from the beginning, which involves many small aspects from the functions, performance levels, efficiency levels, etc. Let me give you a simple example. You have to understand what types of batteries this system needs to manage, is it a common lithium electronic battery or something else. For different batteries, there are many different requirements for the management system in various small links such as parameter monitoring and temperature control.

    Next, the second biggest idea is to select parts. If I ask me to choose well, I will succeed half of it. We have to know that each component must be adapted to the entire system if it is of quality. You can't just have this kind of brain that is very enthusiastic. Let’s talk about the acquisition circuit. It not only requires accurate data collection, but also durable, so that subsequent maintenance is not cost-effective. Otherwise, how can we ensure the equipment is stable and normal operation for a long time? What I want to mention is, and.

    Then let’s talk about the software design level. This software algorithm must be designed with rigorous design. For example, if the error is large when calculating the remaining battery capacity, how troublesome will it be to use it? It often causes misunderstandings to users and delays. It is necessary to ensure that the calculations are accurate and thoughtful in various complex situations. Furthermore, let’s talk about it from the communication level. In order to ensure the stability of communication between each module and this system, you must pay attention to many aspects such as compatibility and speed issues when choosing a communication protocol. Many of them have to be thought about them carefully.

    I have to say that we have to set up a security mechanism! The importance of this is self-evident. Whether it is overcharge and over-discharge management, under-voltage protection, etc., it is related to the long-term and stable operation of the entire system. Safety issues must not be underestimated. Then someone must be asking, how should the cost control be balanced when implementing it

    In my personal opinion, in the entire process of progress, we have to carefully study and study each link and small details, and continuously improve the overall management ability. There is a great correlation between each step. Provide global procurement services for weak current intelligent products! If the first link is not properly closed, it will easily lead to a lot of discounts in the entire effect. We have to spend a good effort to ensure the maximum results as much as possible! Each link must cooperate with each other in order to achieve functional goals! When we do this, we should also pay attention to the team building. Try to concentrate on selecting talents in all aspects to ensure strong human resources support. Yes, it is good.

    Maybe I want to ask how to evaluate the operation? We must build a reliable testing environment, conduct tests under various complex situations, and record the results to improve. You can also establish a daily inspection system to solve defects at any time and optimize and adjust them in a timely manner.

    Compared with traditional battery management systems, the advantages are obvious. For example, it is much more flexible. When adapting to many changes in different businesses and developing, it is easier to update and upgrade later. How can you let go of these good things? Tell me, you should understand it, then compare those closed management systems.

    It is very open and can allow all parties to use their advanced technologies to develop and have better synergistic effects with other systems. So the development cycle is easy. Some people are curious about the length of the development cycle. This depends on the specific and small aspects of the project. The requirements are clear and the team is experienced, and the cycle will be much shorter, so it depends on the details.

    Compared with some common similar products in the market, how to highlight the differences? We must focus on the different special requirements of customers, improve the design in a targeted manner and then form unique advantages. From the perspective of personalized customization or cost efficiency, we must also ensure after-sales service to respond to various problems in a timely manner. When implementing, you must do a good job of adapting software and hardware levels to the software level. To ensure that the functions are complete and sound, you cannot only focus on one. You must coordinate the situation of both parties. This will help you detect problems as soon as possible, so that the smooth progress of the project can be easier. If you want to further optimize the accuracy of the battery state estimation. Through optimization algorithms, different types of calculation methods are selected? By referring to different methods, using a hybrid strategy and adapting to the actual situation, you can achieve a higher degree of consistency. In terms of communication, you should also pay attention to stability. Choose stable and reliable communication equipment to reduce external electromagnetic interference to ensure smooth information transmission to both parties.

    It's hard to implement. Technical personnel, all departments must work together to form an efficient mechanism to operate. With the further innovation and progress of the industry. It will definitely shine in more application areas. There is nothing to say. We must firmly believe that when we continue to improve and improve, we can gradually improve the stability of better stability. Then, we will form a sound system in the subsequent maintenance. Maintenance system maintenance regularly conducts state assessments. Find potential problems as early as possible. Replacing obvious wear parts can ensure that the whole long-term stability and reliability. When choosing the hardware, we should reasonably weigh the quality and price and then find the product that is most beneficial to our cost-effectiveness. When controlling the budget, we should fully consider the subsequent changes and impacts to adjust it. Then, compared with traditional battery management, we should manage different stages more effectively. We should avoid many minor problems in the tradition. We should consider the subsequent development trends. I think it is better to have a deep marriage with the intelligent system, which is more convenient to operate and control, and improve user experience. I am very optimistic about how to achieve future progress, so that the battery life will be greater, and if it is developed in refined management, we can better control the entire process more strictly and strictly control the details.

    So if someone asks about security, how to ensure it

    I will answer that generally speaking, there are related protection mechanisms and multiple protections, so pay attention to on-site safety during actual deployment and work normally. So how to maximize communication efficiency at this time

    Through protocol optimization, these processing measures such as updating and replacing equipment.

    Some people are interested in what the subsequent innovation direction is mainly based on battery characteristics combined with other disciplines to create innovative ideas, and what states are introduced to big data analysis and predict?

    Regarding safety measures, the built-in safety protection system in the system is designed as the core, and then the measures are improved to ensure a safe use environment.

    What do you care about? If the hardware adaptability must be selected before verification can you know the real situation?

    Then the subsequent system update is not convenient, so it is easy to update based on open source software without any effort!

    In summary, I said that the conclusion is that it has great prospects, great practical value and good application prospects, as long as each link is carefully handled according to the relevant guidelines. , can definitely become a powerful helper to many industries

    Based on advanced concepts, we have many work efficiency in this way. This greatly improves the operator experience. As long as we deepen our learning in this direction, we will explore.

  • Energy – Efficient Data Centers: Hot Topics, Why Do You Want To Do It?

    – Data, this is a hot topic, let's talk about it slowly.

    First of all, what is – Data. It is the kind of data center that consumes as little energy as possible during operation, and can also make various data processing, storage and other functions. Do you know? This concept is important to the global energy layout and corporate costs.

    Let's talk about why we need to do it – Data. Nowadays, energy is so tight, so there are only so many resources on Earth. The energy consumption of data centers is very high. For example, the server is running day and night, and the cooling system must be turned on all the time. The power consumption is always scary. If it can become – , it can save a lot of energy. Besides, the company's cost is not going to save money by using less electricity, so that's more cost-effective.

    Then talk about the key parts, how to make the data center -.

    First, be cautious when selecting equipment. Buy those energy-saving servers, which can use less power without discounting performance. You see, some newly developed servers use new materials and technologies to reduce energy consumption, but process faster, which is so good.

    The second is the cooling system. Traditional cooling systems consume a lot of energy. Now there is a new technology that combines air cooling and liquid cooling. By precisely controlling the temperature, liquid cooling energy can more efficiently take away the heat generated by the server, which is much more energy-saving than the old air cooling method. In addition, intelligent temperature control equipment can be installed to automatically adjust the cooling level according to temperature changes to avoid excessive cooling, which will save energy.

    The third point is that power management is also an important part. Using those high-performance power modules, new power conversion technologies can reduce the energy waste of power supplies during the conversion process. There is also a reasonable power distribution strategy to ensure that each device uses electricity as needed. Some equipment should not be overpowered and some are not enough, so as to effectively utilize electricity.

    Let’s do a few questions and answers to add details.

    Q: Is it difficult to upgrade the old data center

    Answer: This matter depends on the situation. If the old data center infrastructure is relatively poor, it is still a bit troublesome to transform. It requires some money and time, from server replacement to cooling system updates. But as long as you formulate a good plan and advance it step by step, it is not impossible to do it.

    For example, ask: – How much electricity can Data save compared to ordinary ones?

    Answer: This is hard to say. Different data centers have different functions and scales. Generally speaking, it is not impossible to save energy by 20% or 30% of the energy savings.

    Someone also asked: When building a new data center, we must build it according to high standards?

    Answer: Yes, yes, from the very beginning, we must pay special attention to energy conservation. This not only reduces future operational energy consumption, but may be more investment in the early stage, but in the long run, it will save more money and cost-effectively. Provide global procurement services for weak current intelligent products!

    I personally think that it is really necessary to build energy-efficient data centers. It's great for our environment and for those companies operating data centers. Pay more attention to new energy-saving technologies and plan and implement them well. I think data centers will definitely develop in this direction in the future!

  • Lifecycle Cost Analysis Tools For BAS: A Powerful Tool For Cost Analysis Of Building Automation Systems?

    Speaking of cost tools for BAS, first of all, we need to know that it is actually some tools such as conducting full life cycle cost analysis of building automation systems. This thing can help us accurately grasp the details of the various expenses of BAS in the entire life process of using BAS. While thinking about it, it is not a simple list of tools, but a comprehensive consideration of many factors, so the cost range involved is broad.

    These tools are of great effect. From the perspective of cost assessment, they can provide accurate calculation reference for the formulation of specific budgets for this building automation project. While calculating, we are very worried about overspending when we are working on projects, aren’t we? Through these tools, we will do some simulated budget planning and have clear control over every stage of the project! For example, if it analyzes the operational expenses, the tool will combine the corresponding energy consumption model, maintenance requirements and other factors, which can help us greatly save electricity consumption and maintenance costs during the operation of construction equipment. For example, if we want to know whether the future expenditure is correct, we can think about this logic and find that there are long-term development considerations, tools become the role of trend observers. It is estimated that the equipment will be eliminated in the future, the cost of transformation will be spent, and scientific forward-looking deployment will be made for subsequent updates.

    1. Data evaluation and calculation module analysis

    First of all, we need to talk about the relevant situation of the calculation module. We need to analyze the cost factors and input data in detail. It is not easy to solve the problem. In terms of the module's own analysis methods, if it is more refined, it can match the cost factor data to a suitable mathematical model, and the analysis will be thorough.

    2. Display and convey the good or bad tools

    Although the data can be obtained, it is very important to make other people in our professional field recognize it, such as the production of some reports. If the report is generated, if the charts are combined with intuitive numbers, the report can quickly understand the actual meaning of the data, and we can implement the project in a targeted manner. Some tools are displayed with weak graphics dynamic interaction, so the display situation is much worse.

    Some software can intervene in the analysis from the very beginning of the project planning stage. They can provide an overall economic evaluation based on the latest market technology development and corresponding cost information. If you want to change the expenses after the project is implemented, it will not be easy. Different cost modes have different algorithmic basis considerations, such as the idea of ​​using separate cost and benefit calculation and cost-effective comprehensive calculation modes, is it true that the algorithm foundation will affect the final result.

    Key questions answers

    Q: I am concerned about the real-time update of data. What are the existing tools?

    Answer: Many excellent tools are equipped with sensors and other channels to track real-time changes in cost data and equipment usage status to ensure that the analysis is kept up with reality.

    Q: If the tool cost is particularly high, how to choose?

    Answer: In this market environment, high-priced tools often bring greater functions. You can consider them based on the actual basic volume of your own business. If you use small amounts and expensive things, it will be unpaid. We also need to consider our business development plan in the future. If the tools are highly versatile, it depends on whether you can afford such a problem in the future. .

    My personal opinion is that cost tools for BAS is obviously of great importance, so you must carefully consider the details mentioned above in the actual process of doing things! The rationality of each step should be considered based on the special circumstances of the project. Only by doing this can the construction automation industry develop towards low costs and maximum effects, and the road to development will be smoother and smoother! Provide global procurement services for weak current intelligent products!

  • What Are The Effective Ways To Expand The Power Supply Distance Over Ethernet? High-quality Network Cables And Extenders Are The Key

    Speaking of the extended Ethernet power supply distance, you know that the word PoE, PoE, is actually the full name of Power over. The extended PoE distance. Simply put, it can make the distance between power supply and data transmission through Ethernet farther and whether it is correct or not. Under normal circumstances, there may be a limit on the distance for power supply and data transmission. We will find a way to increase this distance, which is what is called the extended PoE distance.

    Let's take a look at some effective ways to expand this PoE distance

    1. If you choose a high-quality network cable, the better the network cable, the smaller the transmission attenuation, and it can spread farther. For example, the difference between the sixth or super sixth network cables is not a little bit different from ordinary ones.

    2. The extender is also very useful. The principle of this extender is that after adding it to enhance the signal, the signal may continue to run forward and run further to the device that needs power and transmit data.

    3. Also, if the device supports the injector method, we can also consider it. It can bring the power supply system closer to the target device, and it will be useful for extending the effective transmission of this PoE at a certain distance.

    Let's talk about more specific details. Let's give an example. Why do you need to choose a good network cable? If the quality network cable is not good, the power consumption will be lost and the data will not be good. The long distance will not be good.

    Q: How much impact do different PoE standards have on extended distances? Answer: Different standards have different powers, etc., which have an impact on the transmission distance. For example, the old standard power may be shorter. Now some new standard power is higher. This distance may be a little bit more.

    Q: Can the extender and injector be used at the same time? Answer: Theoretically speaking, if the configuration is reasonable, using the two together within a reasonable range can further optimize the transmission distance, but if it is not configured properly, it may be ineffective and unpleasant.

    The effect of expansion solutions made by different types of manufacturers is sometimes quite big

    It is more technically more mature to test things from large manufacturers, so it can relatively run the signal far.

    Of course, some of this small manufacturer are doing well. Anyway, when choosing, we need to look at the experience, reputation and data indicators, and finally we still have to figure out the principle and choose the most suitable one. Let it help us to set the PoE distance according to our needs. Sometimes, it can always achieve the goal and provide global procurement services for weak current intelligent products! If you want to expand this distance, you may not have the best results by thinking about it yourself or using small manufacturers. You must consider comprehensively and choose the plan.

  • How Important Is The Basic System For Life Support In The Moon Colonies? Let's Talk About What It Is

    Speaking of Lunar Life BAS, which is the basic system for life support in the moon colonies, it is really important to say. Let’s talk about what this is. The so-called basic system for life support in the moon colonies is a basic system that ensures that people on the moon can survive and live normally like on the earth. You see, the conditions on the moon are very different from ours. The surrounding environment is particularly harsh and there is no such thing as air breathing. If there is an excellent basic system for life support in the moon colony and this person can continue to do scientific research, or even live, then there will be hope.

    Let's talk about this key content separately for your friends.

    If you want to talk about the first one, it must be the air system. Everyone thinks that the earth is filled with gas that can be used for people to breathe. But when you arrive on the moon, it's deadly. A specially made air circulation equipment is about to be launched! Relying on filters to filter dust and some dirty things inside, we also need to re-produce air that is suitable for people to maintain their lives and can breathe and be comfortable in an environment similar to the earth. The carbon dioxide must be disposed of or turned into other things that are useful for maintaining the air environment there, etc., so as to ensure that people can get fresh and free of bad things at any time. If this system cannot be guaranteed continuously, people will feel stuffy and breathing soon! Then there is nothing to play, right?

    The second important thing is the water supply system. On our earth, it seems that when the water dragon is turned on at any time, there are liquid water. In the absence of the moon, other substances containing water components need to be decomposed, extracted, and reconverged to make it into liquid. Such reliable fresh water is used to use some nano-level and advanced filtration methods. All the tiny particles and impurities in the water must be removed! In this way, people can use it when taking a bath, drinking water, and cooking, so they will not have to worry about whether they can survive without water. If there is a system problem, it will be troublesome, and soon the water shortage crisis will be faced, and it will be uncomfortable if you can't take a shower.

    Then talk. What environment do we live in? The living place that we built must be able to withstand the impact of various strong rays and small flying around the universe. Only when we use very strong and special synthetic materials, these materials not only have the ability to resist external damage and regulate temperature. No matter whether the monthly temperature is extremely high or extremely low, the living areas in the house can be kept comfortable! Otherwise, it would be so hot outside that it would be stuffy, and it would be trembling inside that it would be cold outside that it would be trembling inside!

    Let’s talk about the power supply system sector. Considering what solar energy needs to be used is right. On the moon, it can be used to transfer energy to store and convert electricity. Then it can be arranged reasonably. It is still in the exploration of fuel cells. There are also small nuclear energy. As some backup combinations, it can ensure stable electricity consumption for residents. Otherwise, even the lights cannot be turned on. Is there any way to operate it? That certainly won't work

    The food is quite good, and it cannot be ignored or underestimated! Some people don’t eat there, so how can they do something? Plant some plants. Create a specific greenhouse to add other culture medium to the soil of the moon through various modern cultivation methods and methods to grow various yield seedlings. There are vegetables. We have also started experimental research on small animals with low requirements for recycling breeding, and we are expected to obtain meat and other animals! Make sure we can have balanced nutrition, etc.! OK, let’s talk about some of the following questions and answers after all the key points.

    Q: How quickly will this BAS be restored if it fails? Answer: If you see the serious fault, you must tell me the general minor problem. According to the early design, the emergency repair team will solve it immediately within three hours! When the key system collapses, what emergency response and rebuild the plan, spend more energy, and try to get back stability within 15 or 16 hours to ensure the safety of life. What's next?

    Q: How is the system compared to those systems on our earth? Answer: These systems on the earth are much more mature, and many have been optimized for hundreds of years. Lunar Life BAS is particularly in its infancy. It can adapt to the means and ability to harsh conditions, so it needs to be more running-in and developing, and some conditions do not exist on the earth at all. On this moon, the system designed requires additional considerations to ensure the reliability and sustainability of maintenance under various external forces, which is not so similar. Here I will give you a friendly sentence to provide global procurement services for weak current intelligent products! Then talk about the next question, what is wrong, what is the content, what is the explanation, etc.

    Q: How do you compare the energy acquisition of the system with the use of wind, water, etc. on the earth? Answer: The use of energy on the earth and wind and water are incompatible with the environment on the moon! The wind energy next to the moon can be ignored. There is no air where the air flow comes. Besides, water resources can almost be said to be non-existent. The moon uses solar energy. There are also explorations and uses a small part of the controllable and slightly milder nuclear weapons, etc., and other special materials on the moon as supplements. These methods have their own unique and completely different methods.

    . Another question is what to say

    Q: What special material is needed for air filtration? Answer: Yes, some air filtration is metal material, some are called high-strength nanocomposite materials to block large impurities. Nano is for tiny, very, very dust particles or molecular particles to intercept the filtration to prevent the circulating system from continuing to pass through. This is very important. Otherwise, these harmful and tiny air circulate and suck it into the lungs, which makes people feel uncomfortable. This is definitely not possible. Yes, it is absolutely necessary to avoid it!

    According to my personal opinion, we must study this Lunar Life BAS not only reflects the pursuit of scientific research, but also has extraordinary key significance for the extension of future space. All parties must work hard to make it solid and stable, and they also need to constantly explore and create new things! That's all. Maybe humans will carry out the moon in the future. That's a great result. We need to support and work hard and do it seriously.

    .

  • What Is The Use Of Retrofit Kits For Old Office Buildings? Come And Find Out

    Kits for Old These things are for old office buildings. Let’s first understand a general concept. This Kits means, which is to transform the kit, just like those offices in an original state. The role of these kits for renovation of old office floors is really big, so let’s take a closer look at the specific content.

    Let’s talk about a point that needs attention first. First of all, these kits often cover multiple key parts;

    1. For example, there are line modules related to hydropower transformation, such as those that can improve the layout of power lines. Think about it, the wires of the old building were complicated, and some places were unreasonable and had minor problems. This is very annoying. Some modules are specifically responsible for this area, which can re-regulate the direction of these lines and improve the safety of power supply. Replacing an aging or messy line is safer and more reliable, such as a special line with better insulation, etc.

    2. Then there is some advanced heating and ventilation equipment for HVAC. Old offices often have hot issues such as poor ventilation and uneven heating in some places, which are particularly prone to this. Some kits will bring new air circulation equipment; and there are also precision small equipment for regulating temperature balance, etc.

    Next, let’s talk about the highlights of these kits that are particularly attractive. It is to be able to fully demolish and make construction without large-scale. Usually, it doesn’t cost much and requires manpower and energy. When special components are transported to this construction site, start installing them in a simple way like the instructions. It will be very different and can be put into practical use. You should know that traditional large-scale renovations cost not decimals. Not only is the cost high, but the duration is relatively long, the decoration construction period can be appropriately reduced and the money can be reduced by using the kit. And from an environmental perspective, this is in line with the concept

    Do you have some daily doubts about this type of product? Let's take a look in question and answer

    Q: So how much has this kit improved the actual overall functional performance of the old office floors used by our company?

    Answer: The specificity of this actually depends on the targeted direction of each suite and the standards required by the entire company. However, most cases have optimized service life, and some bad things are. If you choose the correct planning scheme and purchase suitable components of the quality of the right product, common such as air exchange and bright space treatment can be improved. Some kits can also optimize monitoring settings and other intelligent problems. Provide global procurement services for weak current intelligent products

    Q: Can the kit be more suitable for different types of old office buildings?

    Answer: The starting points of design of this type of product are quite extensive. Under most normal conditions, ordinary office buildings can be tried and used. But before starting construction, we may be able to observe on the spot to see if there are any difficult parts. For example, the large-span ceiling structure and complex space functional structure must be investigated in advance before the construction will be smoother. If you want to renovate, more professional inspection and evaluation may be required to determine the degree of adaptation.

    Q: Regarding the use of kits to decorate our old office area, is it convenient to maintain and repair the subsequent maintenance?

    Answer: In fact, if you want to carry out appropriate maintenance or repair minor faults, it can be said that it is easy to be moderate. Most parts replacements are detailed. Either you can search for the corresponding official information online, and some merchants can often get consulting opinions on sales, but if there are many problems with the previous installation or the use of uncommon low-quality non-standard parts, it may cause inconvenience to maintain.

    As for kits for old office buildings, it can be considered a good idea to be cost-effective, practical and other aspects. If I think about it, if I want to change the functionality of old office buildings. You might as well choose to take a look at this type of product and consider using this type of product. It's really good that the old office environment is worth considering. After using these kits in our daily office space, we can significantly improve the amount of sanitary conditions and infrastructure quality. It really makes the office environment positively impact all aspects, which is a very good plan.