Living in tropical areas, humidity is a perennial challenge. Excessive humidity not only makes people feel hot and uncomfortable, but also causes a series of practical problems such as moldy furniture, damaged electrical appliances, and peeling off walls, which greatly affects the quality of life and residential health. To solve the problem of tropical humidity, we need a systematic solution that integrates prevention, intervention, and daily maintenance, not just temporary dehumidification. Next, I will discuss in depth practical tropical humidity solutions from several key aspects.
How to effectively reduce indoor humidity
The core is to reduce indoor humidity by enhancing air circulation and active dehumidification. Installing a dehumidifier with excellent performance is the most direct and effective way. It is recommended to select a model with corresponding dehumidification capacity according to the room area, and to regularly empty the water tank or connect the drainage pipe. At the same time, making full use of the dehumidification mode of the air conditioner can remove moisture during cooling.
It is also very critical to improve ventilation. During relatively dry periods of the day, such as the afternoon, open the opposite windows to create a draft, which can quickly take away the indoor moist air. For sources of moisture such as bathrooms and kitchens, exhaust fans must be installed and turned on for a long time to ensure that water vapor is discharged to the outside in time to prevent it from spreading indoors.
How to waterproof walls in tropical areas
Starting from the renovation period, we must start with the moisture-proofing of the wall. During wall processing, it is a basic prerequisite to use wall paint with moisture-proof primer and anti-mildew properties. For walls that already show signs of moisture, you must first figure out the cause of the moisture. Whether the cause is pipe leakage or condensation on the wall. Then, based on the identified cause, take corresponding measures to repair it and implement waterproofing at the same time.
Usually when carrying out daily maintenance work, you should avoid placing furniture close to damp walls, and leave a distance of at least 5 centimeters to facilitate smooth circulation of air. During the humid season, you can place some moisture-absorbing items along the foot of the wall, and regularly check the corners and ceiling for mold spots. Once mold spots are found, special mold remover must be used to clean them in time to prevent the spores from spreading everywhere.
How to prevent mold in household items
To prevent items from getting moldy, the key is to control the humidity of the storage environment. Moisture-absorbing boxes or dehumidification bags should be placed in wardrobes and lockers, and to avoid storing clothes that have not been completely dried on rainy days. Important paper items such as books and documents are best stored in sealed moisture-proof boxes, or taken out regularly for ventilation.
For items made of leather, as for items made of wool and other items that are prone to mold, they must be cleaned and thoroughly dried before storage. Use breathable dust bags and place sheet-like items to prevent moths and mildew. Dry food ingredients in the kitchen should be sealed and stored in glass or plastic containers, and food-grade desiccant should be added when necessary.
Correct usage of air conditioner dehumidification mode
Many people use the dehumidification mode of air conditioners, but there are certain requirements for its usage. During the rainy season when the humidity is extremely high, the dehumidification mode can be turned on separately, and the temperature setting can be slightly higher than the comfortable temperature by 1 to 2 degrees, which can save more power while reducing the humidity. It should be noted that the continuous dehumidification time should not be too long to prevent the compressor from being overloaded.
When the temperature difference between indoor and outdoor is not particularly obvious, but when the humidity is high, using dehumidification mode will make people feel more comfortable and save energy compared to cooling mode. However, the air conditioning filter needs to be cleaned regularly, otherwise, the filter itself in a moist state will become a breeding ground for mold reproduction and growth, thereby blowing out air with a musty smell. If it will not be used for a long time, it is best to turn on the air supply mode to dry the inside and then turn off the machine.
What should you pay attention to when purchasing a dehumidifier?
When choosing a dehumidifier, you first need to pay attention to the daily dehumidification capacity, which is generally estimated based on the daily dehumidification capacity corresponding to 0.5 to 0.8 liters per square meter of room area. The noise level is also a key indicator, especially in scenes that need to be used such as bedrooms or studies. It is recommended to choose a model with a noise of less than 45 decibels.
The capacity of the water tank needs to be considered, or whether it has a continuous drainage function. For large spaces or basements, it is best to choose a model with a water pump and drainage pipe connection. Energy consumption levels also deserve attention. Products with first-level energy efficiency will be more economical to use for a long time. Some high-end models also have additional functions such as air purification and clothes drying, which can be selected according to needs. Provide global procurement services for weak current intelligent products!
How to Improve Humidity with Daily Habits
Small adjustments in daily habits can significantly improve the moisture condition. For example, after taking a bath, wipe the water droplets on the floor and walls promptly, turn on the exhaust fan while closing the bathroom door, and cover the pot lid and turn on the range hood when cooking to reduce the dispersion of water vapor into the living room and room.
On rainy days, open the windows as little as possible. When drying clothes, try to use a dryer indoors or use a washing machine with a drying function to prevent the humidity from increasing indoors. You can plant some indoor plants with hygroscopic properties, such as Boston fern and ivy, which can not only regulate humidity, but also make the environment beautiful.
For the high humidity environment in the tropics, what are the most effective or unique moisture-proof and dehumidification methods you have tried? Welcome to share your practical experience in the comment area. If you find this article helpful, please like it and share it with friends who also suffer from humidity.
Leave a Reply